Water spreading across the floor?

When to Shut Off Your Water and How to Find the Valve

Shut off the main, then request a visit

Shutting the cold supply valve at a water heater to stop a hot side leak until the visit
Illustration: stopping a hot side leak at the water heater.

Shut off your main water valve if water is spreading across a floor, coming through a wall or ceiling, or running somewhere you can't stop it. For a suspected slab leak with no water showing, you usually don't need to live with the water off, but knowing where the valve is matters before you need it.

When to shut it off now

Shut off the main if water is pooling or spreading, if a ceiling or wall is wet and growing, or if you hear a loud rush you can't trace. Turn off electricity to any area where water is near outlets or appliances, if you can do it safely.

When it can wait for the visit

A moving meter or a higher bill with no water showing usually means a slower leak. Many homeowners keep the water on until the visit and use the main valve overnight or when away to limit the loss. A suspected hot-side leak can be stopped at the water heater alone, which keeps cold water on; the warm spot guide shows the valve.

Where the main valve usually is

In many slab-built homes, the house shutoff is outside near where the line enters the house, often near the front hose bib, the garage, or in a small box at ground level. Some homes have it inside the garage near the water heater or softener. There's also a valve at the meter box, but that one may need a meter key.

If you're away for the summer

If you leave your Goodyear home empty for weeks, consider closing the main before you go and leaving irrigation on its own supply if your yard needs it. A leak that runs for a summer with nobody home can do far more damage than one caught in a day.

After the water is off

Note the meter reading, take photos, and request a leak inspection. If the leak needs locating before repair, the slab leak detection page explains what happens at the visit.

Common questions

What do I do if I have a slab leak?

If water is spreading, shut off the main. If not, note the meter readings, avoid cutting or drilling the floor, and have the leak located by a leak detection professional before any repair.

Can I keep using water with a slab leak?

Often, for a short time, if no water is showing. Close the main when you can't watch it, such as overnight, and get the leak located soon.

Think water is going somewhere it shouldn't?

Tell us what you're seeing, and we'll set up a leak detection visit. Nothing is booked until you say yes.

  • Tell us what you noticed and where.
  • We set up a visit with a leak detection professional.
  • You decide on any repair after the leak is located.
Give us a phone number, an email, or both.
Please don't include payment details, ID numbers, medical information, or anything else private.

Sending this only asks someone to contact you. A provider has to see the property before giving you a price.